全国咨询热线:
0769-85834598 

欢迎进入东莞市宝轮精密检测仪器有限公司!

在线客服

在线客服
工作时间

周一周六 8:30-17:30

联系方式

业务赵小姐18924354626

业务汪先生13532879633

International Salesperson Cindy13873347101

热门关键词: 塑胶开炼机        电热水冷开炼机       程控硫化机        塑胶压片机           密炼机

新闻中心

NEWS

联系我们

CONTACT US

地址:广东省东莞市厚街镇上屯上涌路25号厚道路边

电话:0769-85834598
        0769-85891915

传真:0769-85833096

经理:赵小姐 18924354626
业务:汪先生 13532879633

新闻中心

How many steps are there in the mixing process?
专栏:Industry information
发布日期:2018-09-06
阅读量:1122
作者:佚名
收藏:

How many steps are there in the mixing process?

The mixing process of small mill is divided into three steps: roll, powder and turn

1. Package roll: operation process the following: the raw rubber or plastic rubber mixing, masterbatch and so on the big rock side into the mixing machine two roll gap, roller distance control in 3 -- 4 mm, rolling 3-4 minutes, before make the package of the roller, a smooth packages gap of rubber roller, at this time to remove all glue, switch to a 10-11 mm roller spacing, then put glue in refined 1 minute or so. According to the number of rollers cut off part of the residual glue, so that the end of rollers to maintain a certain amount of accumulation of glue.

2. Powder feeding: the mixer is then added in the order of the compound according to the material. The process of rolling the compound into the glue is the powder eating process

3. Double glue: With powder all listen to after eating, cast more than cut off the glue, the central cutter points at both ends, and then add the liquid softener, continue to roll, 4 to 5 minutes after being all blending, cut a volume, reduce the accumulation period, through refining the purpose is to make rubber blending evenly, further refining method for oblique cutting, and (eight knife method) after operation, play the triangle method and dao glue method (cutting) several kinds, such as more effective is the art of using saber is eight direction parallel to the roll axis 45 ° Angle cutting, about four times a week, over 3-4 minutes, after refining, again from the rollers to 4 to 5 mm, Then use the cutting method to add to turn over and smelt 2-3 times, the next piece park. Roller greenhouse controlled in material fusion sun. The whole mixing process is completed.

For more products, please visit our official website: http://www.baolun.com/zh-CN/displayproduct.html? ProID = 567221

上一页:Product introduction of laboratory double-roll mill (ii)
下一页:Description of working structure characteristics of small laboratory mixer