全国咨询热线:
0769-85834598 

欢迎进入东莞市宝轮精密检测仪器有限公司!

在线客服

在线客服
工作时间

周一周六 8:30-17:30

联系方式

业务赵小姐18924354626

业务汪先生13532879633

International Salesperson Cindy13873347101

热门关键词: 塑胶开炼机        电热水冷开炼机       程控硫化机        塑胶压片机           密炼机

产品中心

PRODUCTS

联系我们

CONTACT US

地址:广东省东莞市厚街镇上屯上涌路25号厚道路边

电话:0769-85834598

传真:0769-85833096

经理:赵小姐 18924354626
业务:汪先生 13532879633

产品中心

SHARP POINT TESTER 8

  • SHARP POINT TESTER 8
SHARP POINT TESTER 8
SHARP POINT TESTER 8
  • 产品介绍
  • 售后服务
  • 产品图片

Tester correction procedure
■   Clockwise rotation loosen locking ring.
■   clockwise turn test hat, and make the red indicating lamp to shine.
■   anti-clockwise slowly turn test hat, until the indicating lamp put out.
■   Move front or back turn the test hat makes sure the indicating lamps just shine the accurate position.
■   Comparison the marked scale line of locking ring, align at the scale line of test hat. 
■   Anti-clockwise turn test hat 5 grid scale line (on hat the distance of between the two short line is one grid).
■   screw the locking ring, until close to tail hood.

Test procedure
Put the peak in the shape point test tank, grip the test and forcing the strength4.5N, examine the indicating lamp whether shining. If make the shape point tester vertical,  not forcing strength, then this tested object strength should be 4.5N(1LBS)。

Determination: if lamp is bright, then the object is off-test product, may think has shape point exist.
Conform to the standard:ASTM F963 4.8, EN71-1998 8.12, GB6675-2003 A.5.9, 16 CFR 1500.48。
Fitting: weight, the light bulb 2, a pair of battery.

上一页
下一页